Hubbardton Forge 203050 - Manual

H U B B A R D T O N F O R G E . C O M
hand-forged, vermont-made lighting and accessories
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
All designs and images ©1989-2013 Hubbardton Forge ® . All rights reserved. 30763
Assembly & Installation Instructions
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
Please Note: This fixture is designed to be mounted on a standard wall
surface and may not be suitable for all applications. If installing in a non-
wood frame application, we recommend consulting a qualified builder
or electrician.
After installation, extra hardware and accessories may be left due to kits
being used on multiple products.
To Mount Fixture to Single Box (Figure 1)
Component Parts
A Fixture
B Mounting Bracket
F Cupped Washer
G Ground Screw
H #8 Black Screws (4)
CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX
PRIOR TO INSTALLATION.
1. Carefully unpack the fixture from the carton.
2. Using two machine screws (not provided), fasten the
mounting bracket (B) to the electric box.
Note: A new electric box comes with screws. When replacing a
fixture, retain the existing screws for use with the new fixture.
3. Hold the fixture (A) close to the mounting bracket (B) and
using suitable wire connectors (not provided) connect fixture
wires to supply wires (white to white and black to black).
Run a pigtail lead from the ground screw (G) and
cupped washer (F) to the electrical box and
connect all ground wires (bare copper or green to bare
copper or green).
CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRE IS EXPOSED.
4. Carefully tuck all wires behind the fixture (A) and inside the
mounting bracket (B). Place the fixture (A) firmly
onto bracket (B) and fasten with #8 black screws (H) on top.
5. Install two remaining black screws (H) in bottom of fixture (A)
attaching to mounting bracket (B).
B318
Lisse Sconce 203050 Page 1 of 3
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
(Figure 1)
(Continued)
F
G
B
A
H