B132, Installation & assembly instructions – Hubbardton Forge 217910 User Manual

Page 3

Advertising
background image

H U B B A R D T O N F O R G E . C O M

hand-forged, vermont-made lighting and accessories

154 RT. 30 SOUTH

CASTLETON, VERMONT 05735

All designs and images ©1989-2014 Hubbardton Forge

®

. All rights reserved.

21128 Rev B

Installation & Assembly Instructions

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

Install Fixture

(Figure 3)

Component Parts

A Fixture

C Wall Mounting Bracket

G #8 Black Screw (10)

H Ground Screw

I Cupped Washer

J Wireway Cover

K Threaded Standoff

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX
PRIOR TO INSTALLATION.

1. Remove the wireway cover (J) and save for later installation.

2. Hold the fixture (A) close to the wall mounting bracket (C)

and ground the mounting bracket using the green ground

screw (H) and cupped washer (I) to secure a pigtail lead to

the bracket.

3. Pull the four supply wires and ground wires through the front

wireway area.

4. Place the fixture (A) over the bracket so the holes in the top

and bottom match the threaded standoffs (K) protruding

from the wall mounting bracket (C). Secure the fixture by

threading the #8 black screws (G) through the holes in the

fixture (A) and into the wall mounting bracket (C).

5. Using suitable wire connectors (not provided), connect

fixture wires to supply wires (white to white, black to black,

and bare copper or green to bare copper or green).

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRES ARE EXPOSED.

6. Carefully tuck all wires behind the fixture assembly and

inside the wall mount bracket.

7. Install the wireway cover (J) and secure with #8 black

screws (G).

8. Install light bulbs.

9. Refer to diffuser and front mounting instructions below to

complete installation.

B132

For Silhouette Sconces 217910F

Page 2 of 4

(Continued)

(Figure 3)

C

A

G

K

J

H

I

Advertising