Hubbardton Forge 274101 - Manual

H U B B A R D T O N F O R G E . C O M
hand-forged, vermont-made lighting and accessories
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
All designs and images ©1989-2013 Hubbardton Forge ® . All rights reserved. 30899-
Shade Installation Instructions
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
To Install Glass Diffuser (Figures 1 & 2)
Component Parts
A Finial
B Washer
C Diffuser
D Shade
E Socket
F Threaded Stud
1. Carefully unpack the lamp from the carton.
2. Remove finial (A) and washer (B) from threaded stud (F) and
save for later use. Finial and washer are shipped installed.
3. Install bulbs. “C” version bulbs are included.
4. Slip shade (D), diffuser (C) and washer (B) onto threaded
stud (F). See Figure 2 for washer orientation.
5. Thread finial (A) onto threaded stud (F) on socket (E) and
tighten until snug. Be careful not to over tighten.
C63
Balance Table Lamp 274101 & 274101C Page 1 of 1
(Figure 1)
C
A
B
D
F
E
(Figure 2)
FINIAL
FINIAL
WASHER
WASHER
TOP OF DIFFUSER
TOP OF DIFFUSER
CORRECT ORIENTATION WRONG ORIENTATION