Hubbardton Forge 306008 - Manual

Installation Instructions
B215
For Tourou Outdoor Sconce 30-6006, 30-6006F, 30-6007, 30-6007F, 30-6008 & 30-6008F Page 1 of 2
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 24851 Rev B
For fixtures requiring assembly, please refer to assembly instructions before installation.
To Install Fixture (Figure 1 & 2)
Component Parts
A Cross Bar
B Threaded Studs (2)
C Fixture
D Knurled Balls (2)
E Caulking
Lip
Caution: Be sure power is off at the main breaker box prior to
installation.
1. Carefully unpack the fixture from the carton.
2. Using two machine screws (not provided) attach cross bar (A) to
the electric box using inside oval holes to orient fixture.
Note: A
new electric box comes with screws. When replacing a fixture,
retain the screws for use with the new fixture.
3. Start threaded studs (B) into appropriate holes in crossbar (A).
4. Using suitable wire connectors (not provided), connect the
fixture wires to the supply wires, (white to white, black to black,
bare copper or green to bare copper or green). If the fixture is
wired with twin lead lamp cord, connect the ribbed side to white,
and the smooth side to black.
Caution: Make sure wire connectors are twisted on securely
and no bare wires are exposed.
5. Apply a generous bead of a suitable caulking material to caulking
lip (E) on the fixture.
6. Carefully tuck all wires behind the fixture. Place fixture (C) over
threaded studs (B) and tighten firmly to mounting surface using
knurled balls (D).
(continued)
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.
This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
(Figure 2)
(Figure 1)