AMX NI-2100/3100/4100 - Manual (Page 37)

WebConsole - Security Options
29 NI Series WebConsole & Programming Guide
System Security - System Level
System Level Security options provide authorized users the ability to alter the current security options of
the entire system assigned to the Master.
There are two System Level Security pages, accessible via the System Security Settings and Security
Settings links in the System Level Tab:
System Level Security - System Security Settings
Click the System Security Settings link to access the System Security Details page (FIG. 17). The
options in this page allow you to establish wether the Master will require a valid username and password
be entered prior to gaining access to the configuration options.
These are global options that enable or disable the login requirement for both users and groups.
Check the Enabled option to make the Access options available for selection.
The. Security Settings option is only available on the NI-700/900 and NI-X100
series.
FIG. 17 System Security Settings Page