Manage system - diagnostics options, Enabling diagnostics on a selected system device – AMX NI-2100/3100/4100 User Manual
Page 54
WebConsole - System Options
46
NI Series WebConsole & Programming Guide
Manage System - Diagnostics Options
Click the Diagnostics link (in the Manage System tab) to access the Diagnostics Options page (FIG. 31).
The options on this page allow authorized users to enable and monitor various diagnostic messages
coming from and going to System Devices.
Enabling Diagnostics On a Selected System Device
1.
Select the device that you want to Control or Emulate, via the Device Tree:
a.
Click the Show Device Tree option to show the Device Tree window (if it is not already
enabled).
b.
In the Device Tree, click on the Information (i) icon for the device for which you want to enable
or modify Diagnostics options. This opens a Network Settings page showing detailed
FIG. 31
Diagnostics Options Page (with diagnostic messages enabled)
Diagnostic Options table
The System Number, Device Number, and Port Number value fields are read-only
(disabled). Instead of specifying these values for a System Device, select a device
via the Device Tree to populate these fields with that device’s values, as described
below.