AMX NI-2100/3100/4100 - Manual (Page 73)

WebConsole - System Options
65 NI Series WebConsole & Programming Guide
System - Manage Devices
The Manage Devices tab (FIG. 46) contains links to several different device-related pages, as described
in the following subsections:
Manage Devices - Device Options
Click the Device Options link (in the Manage Devices tab) to access the Details for Additional Devices
page (FIG. 46). The options on this page display various details specific to additional (non-NetLinx)
System Devices.
Configuring Device Binding Options
1. Use the Configure Binding Options options to specify how the Master will manage Bound
Devices:
FIG. 46 System - Manage Devices (Details for Additional Devices)
Binding Options
Option Description
Enable Auto Bind: This selection allows you to toggle the state of the automatic binding for
DDD (On/Off).
When auto-binding is enabled, the Master automatically attempts to con-
nect any newly discovered device with an associated application device
(defined in the running NetLinx application).
Auto-binding can only be accomplished if the Master's firmware deter-
mines a one-to-one correlation between the newly discovered device and
a single entry within the list of defined application devices (accessed via
the Binding link at the top of this page).