Apex Digital HT-175 - Manual (Page 21)

IMPORTANT
Note: Use the Interlaced setting when using
a standard TV. If you view a black and white
distorted picture on your TV, press I/P.
(Your installation may be interlaced and
it may have been put into Progressive
Scan mode by mistake).
FUNCTION BUTTONS - CONTINUED
20
Multi-Angle
Progressive Scan
Numeric Key Pad / Direct Program access
Press the numeric key pad to input data for disc or Setup
menu.
Input the desired Chapter or Track number using the
numeric key pad. Press ENTER button to confirm your
direct access Chapter or key selection.
Track - when playing a CD or MP3 disc.
Numeric input - Function / Menu.
Chapter - when playing a DVD disc or for
Direct Program access.
NOTE
Certain DVD discs may not allow direct access functionality.
If a DVD disc contains Multi-Angle feature, viewing
angles may be selected:
During playback, press the ANGLE button repeatedly
to select the desired viewing angle.
Status will be displayed on screen.
A DVD disc may contain
up to 9 selectable viewing angles.
The player is equipped with two types of video outputs:
1) Interlace video output (V, S-Video), and
2) Progressive Scan video output (Y Pb Pr)
For use with ED/HDTV to produce a "film-like" quality DVD
presentation.
To switch between the two modes:
Press the Progressive Scan I/P button on the remote con-
trol.
Note: If you experience a picture that is distorted or in
black and white, press the I/P button.
Certain DVD discs may contain scenes which have
been shot simultaneously from a number of different
angles. For these discs, the same scenes can be
viewed from each of these different angles
using the ANGLE button. (The recorded angles vary
depending on the disc is encoded.)