Swiftech MCX603 V 1-10-04 User Manual
Page 2
4.
Dual processor side-by-side installation
In dual processor “side-by-side”
installations, make sure to
orient the “flat” sides of the
heatsinks towards each other
"rounded" side
"flat" side
5.
Fan compatibility and installation (fan is not provided)
Use the provided snap-rivets to secure the fan to the bracket thru the lower lip of the fan as shown in the schematic page 1. Fans that do
not feature a lip cannot be installed with the provided snap-rivets, and will require a screw and nut to be secured to the brackets.
6.
Recommended fans
Suggested fan airflow rating for normal use (non-overclocked processor), and operating conditions: please visit our w
for a list
of recommended fans depending on the applications.
7. Final
inspection
Now that the heat sink is installed, startup your computer, go into the BIOS and observe the CPU temperature. Under normal ambient
temperature conditions, the processor temperature should never exceed 65
° C. If it does, shut down the computer immediately, and
review your entire installation. Troubleshooting help is available on our web site at
, or by calling customer support at
562-595-8009.
Copyright Swiftech 2003 – All rights reserved – Last revision date 11-24-04
Rouchon Industries, Inc., dbA Swiftech – 1703 E. 28
th
Street, Signal Hill, CA 90755 – Tel. 562-595-8009 – Fax 562-595-8769
E Mail: Swiftech @swiftnets.com – URL:
http://www.swiftnets.com
Information subject to change without notice
Page 2