Swiftech EPSILON GTX295 User Manual
Epsilon waterblock for geforce gtx295
Copyright Swiftech 2009 – All rights reserved – Last revision date: 7-17-09 – One or more Patents Pending - Rouchon Industries, Inc., dba Swiftech® –3700 Industry Avenue,
suite 104, Lakewood, CA 90712 – Toll free (US) 888-857-9438 – Fax 562-595-8769 - E Mail: [email protected] – URL: http://www.swiftech.com - Information subject to
change without notice
Epsilon Waterblock for Geforce GTX295
INSTALLATION GUIDE
1. Preparing the Graphics Card
Remove the stock cooling solution, and then clean off the GPU heat spreader, memory modules, voltage regulators and I/O chip with alcohol, or
preferably with an electronic degreaser such as ArctiClean.
Note: be careful to preserve the thermal pads of the stock cooling solution back-plates, as they will be re-used for installation.
Apply the provided Arctic Céramique thermal paste to the GPU heat
spreader as shown above.
Spread the grease evenly with a razor blade or a piece of plastic
(an old credit card for example).