Swiftech MCR80 F1 - Manual

Swiftech Inc., 1703 E. 28
th
St., Signal Hill, CA 90755 T. (562) 595-8009 F. (562) 595-8769
Page 1 of 2
Packing list
MCR80 radiator 1 80mm fan guard 1
#6 X 1 1/4” Philips screw type B 4 80x80x25mm fan 1
#6 x 3/8” Philips screw type B 4 Worm-drive clamps 2
*
Note of caution regarding the inlet/outlet side of the radiator:
The fan guard MUST BE INSTALLED when using the provided self -tapping screws. It is
necessary to allow sufficient clearance between the tip of the screws and the radiator
core. Failure to use the fan guard will systematically result in permanent damage to the
radiator, as the screws will otherwise punch a hole in the core channels. Users are
advised that such damage is not covered under our warranty.
Likewise, if fans other than the provide 80x80x25mm fans are installed, users should
carefully check the clearance remaining between the retention screws and the radiator
core.