APC Disk On-line Server NAS-2100 - Manual (Page 72)

Chapter 5 Disk On-line Server-Maintenance
Disk On-line Server is specially designed to run 24 x 7 and be ready at all times
against system crash caused by power outage. This section provides a general
overview on system maintenance.
5.1 Restart/ Shut down Server
Follow the steps below to restart or shut down Disk On-line Server.
1. Ask all active users of NAS to save their files and disconnect from the server.
2. Enter the administration page and select Restart/ Shutdown in System Tools.
3. Click Restart to reboot the server or Shut Down to turn off the server. You
can perform these actions by the LCD panel.
5.2 Reset Administrator Password and Network Settings
To reset the administrator password and network settings of Disk On-line Server,
1. Press the reset button of Disk On-line Server for a few seconds. A beep
sound will be heard.
2. Login Disk On-line Server with the default user name and password:
User name: administrator
Password: admin
Note: To reset the system by the reset button, the option “Enable configuration
reset switch” in Hardware Settings must be activated.
72