Swiftech 7950GX2 SPACERKIT User Manual
Swiftech Computer Accessories
Copyright Swiftech 2006 - All rights reserved - Last revision date: 10-13-06 - One or more Patents Pending
Rouchon Industries, Inc., dba Swiftech - 3700 Industry avenue, suite 104, Lakewood CA 90712- Toll free (US) 866-857-9438 -
Fax 562-595-8769 -
E Mail: [email protected] - URL: http://www.swiftech.com - Information subject to change without notice
Thank you for purchasing the 7950 GX2 Spacer kit. This product is intended for expert users. Please consult with a qualified
technician for installation. Improper installation may result in damage to your components. Swiftech™ assumes no liability
whatsoever, expressed or implied, for the use of this product, nor its installation. The following instructions are subject to
change without notice. Please visit our web site at
www.swiftech.com
for updates.
VGA compatibility
The 7950 GX2 spacer kit is only compatible with the GeForce 7950 GX2
Packing list
Quantity
Part
Description
3
# MF800
Male-Female 4-40 x 0.800” Standoff
1
# TA800
Pass-thru female 0.800” Standoff
1
#FF706
Female-Female 4-40 x 0.706” Standoff
1
Screw
4-40 x Philips screw
1
Ramsink
1 MC14 Ramsink
1
7950EB
Extended PCB
Installation Guidelines
Step-by-step
First step
Turn the graphics card over
and remove the one screw
holding to the PCI bracket
Step 2
Turn the graphics card over
and remove all 4 screws
shown above (keep them; you
are going to reuse them).
Step 3
Carefully separate the 2 cards.
Step 4
Remove the stock PCB.
Step 5
Install Swiftech’s extended PCB
provided with your kit.
Step 6
Insert the Female pass-thru
standoff between the card and the
PCI bracket