Swiftech APOGEE XT MUTLI HDP User Manual
Apogee, Xt – multi mount adapter plate
Copyright Swiftech 2009
– All rights reserved – Last revision date: 9-26-09 – One or more Patents Pending - Rouchon Industries, Inc., dba Swiftech® –151 West Victoria
Street, Long Beach, CA 90805
– Tel. 310-763-0336 - Toll free (US) 888-857-9438 – Fax 310-763-7095 - E Mail: [email protected] – URL: http://www.swiftech.com -
Information subject to change without notice
APOGEE
™
XT – MULTI MOUNT ADAPTER PLATE
AMD INSTALLATION GUIDE
– GUIDE D’INSTALATION – GUÍA DE INSTALACIÓN
Remove the stock hold down-plate
Using the provided Hex key loosen all 6 body screws, and set aside the
plate with its mounting screw springs.
Install the Multi-mount hold-down plate
Using the provided Hex key fasten the plate to the block with all 6 body
screws
Amount of grease
Prepare the motherboard: AMD 754, 770, 939, 940, AM2, AM3
Remove the motherboard plastic frame surrounding the socket.
Prepare the CPU
Clean the CPU with a degreaser (preferably formulated for electronics)
then apply the supplied grease to the center of the CPU.
1
2
3
4