Swiftech MCW50 FXKIT - Manual

Rouchon Industries, Inc., d.b.a. Swiftech
1703 E. 28 th St., Signal Hill, CA 90755 T. (562) 595-8009 F. (562) 595-8769
4-40 x 1 3/8"
philips screw
4-40 x 3/16
socket screw
Hold-down plate
Nylon retaining
washer, secures the philips
screw to the hold-down plate
Snap-out these collets
prior to installing the
hold-down plate,
then snap them back into
the water-block
Nylon spacer
Stiffening bar
Nylon compression limiter
spring
Knurled knob
VGA adapter
MCW50 waterblock
Rubber bushing,
flat face down and
centered on stiffening
bar
Swiftech - All right Reserved
MCW50-FX58/5900 adapter
kit
Exploded view - 1-21-05
Example with springs
installed to the back
of the VGA Board
Page 1 of 2