Aluratek ADMPF107 - Manual (Page 12)

12 12
Operations
Viewing Photos
Select “ Photo” (pic 1) on the OSD by pressing “Enter” on the remote control and then select the
media (pic. 2) that you want to view the photo from. You may then toggle up or down to select your
desired picture then press “ Enter” again to view. The default mode is in slideshow, you can disable
it by pressing “ Enter” twice to pause the particular picture. You may manually select the next photo
you wish to view using the included remote control. To move forward simply press and to move
back simply press . If you wish to rotate the picture simply press “ Rotate”.