American Standard Town Square Shower Walls 4834.SWTS - Manual (Page 5)

After the adhesive is set, remove the shim and caulk the exposed seams with silicone sealant. Exposed seams must be
caulked with a clear or matching silicone sealant. The freshened caulked lines can be smoothed and excess sealant
removed by running a clean, damp cloth along the seams.
Apply trim (if any) and accesories (soap dish, etc.) with clear or matching silicone sealants and prop into place until the
sealant sets.
7 5 2 7 7 0 - 1 0 0 R e v . B
FINISHING:
Clean up of silicone sealants or mastics, should follow manufacturer's recommendation. For daily care and cleaning,
refer to the American Standard maintenance label provided with the Corian® solid product shower walls. Always
provide adequate ventilation while working.
MAINTENANCE:
5
6
In Canada:
American-Standard,
2480 Stanfield Road
Mississauga, Ontario
Canada L4Y 1S2
Toll Free: (800) 387-0369
In the United States:
American Standard Inc.,
P.O. Box 6820
Piscataway, New Jersey 08855
Attention: Director of Consumer Affairs
For residents of the United States,
warranty information may also be
obtained by calling the following
toll free number: (800) 442-1902
In Mexico:
Customer Service Manager
Ideal Standard, S.A. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
If, within ten years after its initial purchase, inspection of the Corian portion of this American Standard
product, confirms that it is defective in materials or workmanship, American Standard will repair or, at its option,
exchange the product for a similar model or refund the purchase price.
This warranty applies only to the original purchaser and installation of these products. All labor and
transportation costs or charges incidental to warranty service are to be borne by the original consumer-
purchaser.
This limited warranty does not apply to local building code compliance. Since local building codes vary
considerably, the purchaser of this product should check with a local building or plumbing contractor to insure
local code compliance before installation.
This warranty shall be void if the product has been fabricated or modified in a manner inconsistent with the
product as shipped by American-Standard; moved from its initial place of installation; if it has been subjected to
faulty maintenance, abuse, misuse, accident or other damages; or if it was not installed in accordance with
American Standard's instructions.
American Standard's option to repair or exchange the product under this warranty does not cover any labor or
other costs of removal or installation, nor shall American Standard be responsible for any other incidental
or consequential damages attributable to a product defect or to the repair or exchange of a defective
product, all of which are expressly excluded from this warranty. (Some states or provinces do not allow the
exclusion or limitation of implied warranties, so this exclusion may not apply to you.)
This warranty gives you specific legal rights. You may have other statutory rights that vary from state to
state of from province to province, in which case this warranty does not affect such statutory rights.
AMERICAN STANDARD TEN-YEAR LIMITED WARRANTY
CORIAN ® PROODUCT
www.americanstandard-us.com www.americanstandard-ca.com