Spektrum SPM1305 - Manual (Page 12)

12 SPEKTRUM TELEMETRY
Best Lap
Signal Lap # Lap Time
Speed/RPM Voltage Temperature
��������
����������
The Best Lap screen displays the fastest lap from the point
that the receiver/ telemetry module was last turned on. The
display gives the lap number and the fastest lap time. To reset
the fastest lap, it is necessary to turn off the receiver.
To access the Best Lap screen, press the  button until
Best
Lap appears on the screen. The display with give best lap
number and lap time achieved since the receiver was last
turned on. Reset the Best Lap by turning off the receiver.
Vibrate
Signal Lap # Lap Time
Speed/RPM Voltage Temperature
�������
��������
The handheld unit features a vibration alarm that can be programmed
to warn of over temperature or low voltage, preventing engine
damage or loss of control due to low batteries. The temperature and
voltage thresholds can be programmed and, when exceeded, the
handheld will vibrate alerting the driver/ pitman of the situation.
To access the Vibrate function press the  button until
Vibrate appears on the screen. Press the + or- button
to enable or disable the vibration alarm.
Note: The battery and temperature threshold screen are only
available when the Vibrate function is enabled. (See above)