Spektrum SPM4000C DX4S Addendum - Manual (Page 2)

Spektrum DX4S • tranSmitter inStruction manual EN
1. Select MOA from the Throttle Mix menu.
2. Scroll to Inh. Press the scroll wheel, then scroll to activate
the mix. Press the scroll wheel again to adjust the mix.
3. to inhibit an option
Scroll to the MOA option, then select Inh. All MOA options
are active by default. If you inhibit an option, the Mix switch
ignores the option.
4. Adjust the throttle Bias Value (4WD Only)
The value shown on the screen is a percentage of the rear
motor rate.
For example, a value of “70%” means the rear motor power
is 70% of the front motor power.
5. in Motion Adjustment
You can assign the throttle bias to the following switches:
Assigning the Throttle Bias to a switch enables you to adjust the
throttle bias while the vehicle is moving.
6. Assigning the Mix Options to a Switch
Assign the MOA Options to a switch. Each time you move the
Mix switch, the MOA options appear on the Main Screen.
Bias Step:
The Bias Step affects the amount the mix changes with each
click of the button or dial but has no effect on the total mix
range.
• A
• B
• C
• D
• e
• Dial
MOtOr On Axle (MOA) thrOttle Mix
The MOA Throttle Mix is used to adjust the throttle bias on rock
crawlers using a “motor on axle” configuration.
Mix options:
• Rear Dig
• Front Dig
• 4WD
Main Screen MOA Mix Screen
©2013 Horizon Hobby, Inc.
RaceWare and DSMR are trademarks of Horizon Hobby, Inc.
The Spektrum trademark is used with permission of Bachmann Industries, Inc.
The SD Logo is a trademark of SD-3C, LLC.
Created 4/13 41373 SPM4000