Spektrum SPM9021 User Manual

Dx3r/dx3r pro dropdown kit instruction manual

Advertising
background image

1

DX3R/DX3R PRO Dropdown Kit

Instruction Manual

NOTICE

All instructions, warranties and other collateral documents are subject to
change at the sole discretion of Horizon Hobby, Inc. For up-to-date product
literature, visit http://www.horizonhobby.com and click on the support tab for
this product.

WARNING: READ AND FOLLOW ALL INSTRUCTIONS

Do not attempt disassembly, use with incompatible components, or
augment the product in any way, outside of these instructions. Failure to
follow each instruction and precaution could result in a break of signal
transmission, which will ultimately lead to damage to the product, property
and/or personal injury.

Read ALL instructions. If after reading these instructions you are not
confident in your ability to replace the antenna, send the antenna and
transmitter, free of charge, to the appropriate Horizon Service Center where
this procedure can be performed by an authorized service technician. Or
contact a distributor in your country of service.

CAUTION: Never turn the radio on when changing configurations.

Horizon Service Center

4105 Fieldstone Road
Champaign, IL 61822
USA

877-504-0233

[email protected]

Horizon Hobby Limited

Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

+44 (0) 1279 641 097

[email protected]

Horizon Technischer
Service

Hamburger Str. 10
25335 Elmshorn
Germany

+49 4121 46199 66

[email protected]

INTrOduCTION
Changing the DX3R/DX3R PRO to a dropdown wheel

The DX3R/DX3R PRO can now be set up for a dropdown configuration for right
and left-handed drivers. All the parts necessary for the dropdown are included:
right and left handed dropdown shell, steering wheel mechanism including pot
and trim switches, and necessary hardware.

STEp 1

Remove the batteries from the transmitter. This prevents the possibility of a
short during conversion.

STEp 2

Use a 3/32-inch hex wrench to remove the three screws on the front of the
steering housing as shown.

STEp 3

Carefully remove the steering mechanism and unplug the steering connector.
Remove the steering shell but leave the backplate in place.

SPM9021

WWW.SPEKTRUMRC.COM

Advertising