American Standard Stratford 2470.102 - Manual (Page 2)

STRATFORD™ 5-1/2'
WHIRLPOOL AND BATHING POOL
AMERICAST® BRAND ENGINEERED MATERIAL
© 2005 American Standard Inc.
1676mm
(66)
813mm
(32)
235mm
(9-1/4)
406mm
(16)
OUTLINE OF 1638 X 775mm
(64-1/2 X 30-1/2) CUTOUT 19mm
(3/4)
C/L OF
SUPPLIES
FINISHED
WALL
32mm
(1-1/4)
C/L OF DRAIN
OUTLET
229 X 305mm
(9 X 12) FLOOR CUTOUT
508mm
(20)
476mm
(18-3/4)
MIN.
32mm
(1-1/4)
1-1/2 N.P.T. THREADS
1-1/2 O.D. TAILPIECE
70mm
(2-3/4)
117mm (4-5/8)
SUPPORT
STRINGER
305mm
(12) 102mm
(4)
1651-1982mm
(65-78)
OPTIONAL
70mm
(2-3/4)
FINISHED
WALL
C/L OF
SHOWER ARM
C/L OF
SPOUT
C/L OF
VALVES
C/L OF
OVERFLOW
SEE FITTING SPECS
FOR DIMENSION
203mm
(8)
1676mm
(66)
813mm
(32)
PROVIDE ACCESS
TO PUMP FOR
SERVICING
ON ALL
INSTALLATIONS
235mm
(9-1/4)
406mm
(16)
OUTLINE OF 1638 X 775mm
(64-1/2 X 30-1/2) CUTOUT 19mm
(3/4)
C/L OF 1/2
SUPPLIES
AS REQUIRED
FINISHED
WALL
PUMP
ON/OFF
SWITCH
32mm
(1-1/4)
C/L OF DRAIN
OUTLET
229 X 305mm
(9 X 12) FLOOR CUTOUT
508mm
(20)
476mm
(18-3/4)
MIN.
32mm
(1-1/4)
1-1/2 N.P.T. THREADS
1-1/2 O.D. TAILPIECE
70mm
(2-3/4)
117mm (4-5/8)
SUPPORT
STRINGER
324mm
(12-3/4)
102mm
(4)
711mm
(28)
32mm (1-1/4) DIA. HOLE
1/2 N.P.T. SHOWER
44mm (1-3/4) DIA. HOLES
FOR CONTROL VALVES
32mm (1-1/4) DIA. HOLE FOR
1/2 N.P.T. SPOUT
203mm
(8)
1651-1982mm
(65-78)
OPTIONAL
1/2 SUPPLIES
AS REQ'D
C/L OF SHOWER
CURTAIN ROD
1930mm (76)
OPTIONAL
TO FLOOR
70mm
(2-3/4)
FINISHED
WALL
C/L OF
OVERFLOW
76mm
(3)
SAFE-T-HEATER
REMOVABLE BLANK
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER,
ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY RIM,
SUMP SUPPORT NOT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY
OTHERS
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH
WHIRLPOOL/BATH FOR ADDITIONAL INFORMATION.
OPTIONAL 3-WALL TILING BEAD KIT AVAILABLE AND MUST BE ORDERED
SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
SHOWN WITH POP-UP C.D. & O.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
CONCEALED PIPING NOT INCLUDED.
GENERAL SPECIFICATIONS FOR 2470 WHIRLPOOL
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP 1.6 HP, 9.7 AMPS,120V.
66 x 32 x 20 In. (1676 x 813 x 508mm)
201 Lbs. (90 Kg.)
701 Lbs. (315 Kg.)
60 Gal. (227 L)
40 Gal. (152 L)
42 x 19 In. (1067 x 483mm)
60 x 27 In. (1524 x 686mm)
14 In. (356mm)
55 Lbs./Sq.Ft. (223 Kgs./Sq.m)
13.9
33.7
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3 )
GENERAL SPECIFICATIONS FOR 2470 BATHING POOL
66 x 32 x 20 In. (1676 x 813 x 508mm)
174 Lbs. (78 Kg.)
674 Lbs. (303 Kg.)
60 Gal. (227 L)
42 x 19 In. (1067 x 483mm)
60 x 27 In. (1524 x 686mm)
14 In. (356mm)
48 Lbs./Sq.Ft. (206 Kgs./Sq.m)
13.9
33.7
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
Dimensions of fixtures are nominal and may vary within the range of toler-
ances established by ANSI Standard A112.19.4
These measurements are subject to change or cancellation. No responsibili-
ty is assumed for use of superseded or voided leaflet.
IMPORTANT: