AGFA DC-830 - Manual (Page 13)

- 12 -
Inserting the Batteries
The camera is powered by two AA-size alkaline batteries or rechargeable Ni-MH (min. 1600
mAh / 1.2V) batteries.
1. Slide the battery cover open.
2. Insert two AA-size alkaline batteries with
the positive (+) and negative (-) poles
matching the directions indicated inside the
battery room.
3. Slide the battery cover closed.
Low Battery Indicator
A low battery indicator appears on the
LCD screen when the batteries are nearly
exhausted. Batteries should be replaced
promptly when the low batteries indicator
appears.
CAUTION:
Risk of explosion if battery is replaced by an incorrect type dispose of used batteries
according to the instructions.
NOTE:
Do not use manganese batteries. Manganese batteries cannot supply sufficient power
to support camera operation.
Replace all batteries at the same time. Never mix old and new batteries.
Remove batteries from the camera if you do not plan on using it for more than two
weeks.
The camera body may feel warm after extended use. This is normal.