Audiovox SP-6CD - Manual (Page 5)

2
2 Determine the mounting location and drill four mounting holes.
1
1
4
Self-tapping screw
(M5 x 12)
PROCEDURE FOR VERTICAL INSTALLATION
PROCEDURE FOR 45° ANGLE INSTALLATION
Confirm that the built-in anti-vibration springs on both the left and right
sides are set to the vertical installation position "V".
Attach bracket (L) and bracket (R) using the hexagonal bolts (M5 x 8).
Never mount the unit near the fuel tank.
Drill holes 4mm in
diameter.
3
Secure the unit in place, using four self-tapping screws (M5 x 12).
Drill holes 4mm in
diameter.
3
Confirm that the built-in anti-vibration springs on both the left and right
sides are set to the 45° installation position "45°".
Attach bracket (L) and bracket (R) using the hexagonal bolts (M5 x 8).
Determine the mounting location and drill four mounting holes.
Never mount the unit near the fuel tank.
Secure the unit in place using four self-tapping screws (M5 x 12). Self-tapping screw (M5 x 12)