AVerMedia Technologies AVerVision530 - Manual (Page 19)

17
16
15
14
18
13
22
20
21
19
23
12
B. Advanced Setting
Function Description
12 Restore to original factory setting
13 Select between text and graphic image enhancement mode
14 Display the image from AVerVision530 camera or from the PC IN port
15 Freeze image
16 Adjust White Balance
17 Adjust Exposure
C. SnapShot/Video
Function Description
18 Control the video display by moving the progressive bar
19 Play and control the video display
20 Record the video and save it into the PC
21 Capture a single picture and save it into the PC
22 Locate the saved picture or video clips
23 Setup for the picture snapshot or video recording.
U U s s i i n n g g A A V V e e r r V V i i s s i i o o n n 5 5 3 3 0 0 a a s s a a M M a a s s s s S S t t o o r r a a g g e e
This enables you to transfer the captured image to and from the memory source and PC.
: You MUST read and follow the instructions below BEFORE connecting the USB cable.
Every time when using the AVerVision530 as Mass Storage, you MUST do the following:
1. Select the memory source.
To select the memory source, press MENU > select ADVANCED and
press (►ENTER) > select MEMORY and press (►ENTER) > select
TYPE
and press (►ENTER) > select the source and press (►ENTER)
> press MENU to exit.
2. MUST set the USB SELECT as Mass Storage before connecting the
USB cable.
To set the USB SELECT as Mass Storage, press MENU > select
ADVANCED
and press (►ENTER) > select USB SELECT and press
(►ENTER) > select MASS STORAGE and press (►ENTER).
3. When “STORAGE” appears at the lower left corner of the
presentation screen, you may now connect the USB cable. ( See
“Connecting to Computer thru USB Connection” for illustration)
4. Upon connecting the USB cable, the system automatically detects
the new removable disk.
5. In the Removable Disk dialog box, select Open folder to view files
and then click OK. You may now transfer the file to and from your
PC hard disk.
18