American Standard Williamsburg Champion Elongated Right Height Toilet 4281.702 User Manual

Williamsburg champion® round front toilet, Vitreous china

Advertising
background image

© 2005 American Standard Inc.

WILLIAMSBURG CHAMPION®

ROUND FRONT TOILET

VITREOUS CHINA

WILLIAMSBURG CHAMPION®
ROUND FRONT TOILET

3110.016 Round Front Bowl

4281.702 Tank

• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® Flushing System

performance platform

• 3” non-adjustable, flapper-free flush valve
• Round Front siphon action jetted bowl
• 2-3/8” fully-glazed trapway
• Speed Connect™ tank/bowl coupling system
• Chrome-plated trip lever
• Sweeping pier on bowl
• 100% factory flush tested
• 2 bolt caps
• 10 year warranty

Nominal Dimensions:
28-3/8" x 18-7/8" x 33-1/2"
(721 x 479 x 851mm)

Fixture only, seat and supply by others

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M (and 19.6M) for Vitreous China
Fixtures - includes Flush Performance, Ball Pass
Diameter, Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for Non-
Adjustability - July, 2003 revision

To Be Specified

Color:

Seat: (please specify color)

Champion® Slow Close Round Front #5330.010

Rise & Shine Round Front #5322.011

Laurel Round Front #5308.014

Supply with stop:

FINISHED WALL

19mm

±

6mm

(1

±

1/4)

387mm

(15-1/4)

FINISHED
FLOOR

305mm

(12)

721mm

(28-3/8)

C/L OF OUTLET

83mm

(3-1/4)

216mm
(8-1/2)

419mm

(16-1/2)

C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)

362mm

(14-1/4)

264mm

(10-3/8)

16mm

(5/8)

851mm

(33-1/2)

479mm

(18-7/8)

SUPPLY

AS

REQ'D

254mm

(10)

152mm

(6)

254mm

(10)

356mm

(14)

NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12")
FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided pages.

03/05

Advertising