Ultra Start KE-5 - Manual (Page 2)

Table Of Contents Page 2
Contents. Feature List.
Pre-Installation. Installation Tips.
Main Wiring Diagram Page 3
Quick Start Installation Page 4
Wiring Description. Transmitter Operation.
Transmitter Programming Page 5
System Reset Quick View Programming
System Programming Page 6-7
Relay Diagrams Page 8
Contents
- Control Module - 10 Pin Harness
- Four Button Remote Transmitter(s) - Owner and Install Manuals
Pre-Installation
- Discuss the optional features of the system with the owner of the
vehicle.
- Do a walk around of the vehicle. (Note any scratches or dents)
- Have vehicle wiring information ready before starting installation.
Installation Tips
- Leave a window open to avoid locking the key’s in the vehicle.
- Use seat covers and floor mats to protect the vehicle.
- Avoid disconnecting the battery.
- Unplug the dome light fuse to prevent battery drain.
- Test all connections with a voltmeter or circuit safe test light.
- Install the wire harness so that it is free of any moving parts.
- Solder all connections. Avoid using scotch-lok and crimp connector.
Feature List
- Keyless Entry With Drivers Door Priority - Trunk Release Output
- Positive Park Light Output - Panic Mode
- Horn Honk Output - Starter Disable Output
INSTALL MANUAL
REMOTE VEHICLE KEYLESS
PAGE 2
Table of Contents