Avery FRESHMARX 9415 - Manual (Page 19)

Care & Maintenance 3-3
C l e a n i n g t h e P r i n t h e a d
Clean the printhead after every five rolls of labels or
when you see voids in the print.
To clean the printhead, use a Thermal Printer
Cleaning Card (order number 116527 – sold
separately).
1. Turn on the printer.
2. Lower the supply door.
3. Remove any labels.
Note: You may need to carefully remove the supply
clip so the cleaning card fits through the
supply slot.
4. Feed the cleaning card into the supply slot.
C l e a ni n g C ard
S u p p l y C l i p
V o i d s C o rr e c t Pr i nt