Anritsu MU368060A - Manual (Page 2)

The 3GPP and 3GPP2 recommended dynamic range test for W-
CDMA and CDMA2000 receivers requires AWGN (Additive White
Gaussian Noise) to be mixed on the wanted modulated signal.
When the MU368060A AWGN Unit is installed in the MG3681A
Digital Modulation Signal Generator, AWGN can be generated at
real time.
When both the MU368040A CDMA Modulation Unit that installed
MX368041B W-CDMA Software is mounted, one MG3681A can be
utilized as a wanted signal source (W-CDMA modulating), an inter-
fering signal source (W-CDMA modulating, CW) and an AWGN
source.
Furthermore, since mixed Uplink W-CDMA signal and AWGN inter-
nally can be outputted by setting the C/N in MX368041B, the base
station receiver dynamic range test is realizable by one MG3681A.
When both the MU368030A Universal Modulation Unit that
installed MX368033A CDMA2000 1xEV-DO Signal Generation
Software or MX368031A Device Test Signal Generation Software is
mounted, one MG3681A can be utilized as a wanted signal source
(CDMA2000 modulating), an interfering signal source (CDMA2000
modulating, CW) and an AWGN source.
Furthermore, when both MU368040A CDMA Modulation unit are
also mounted, since mixed CDMA2000 signal and AWGN internally
can be outputted by setting the C/N in MX368033A or MX368031A,
the base station receiver dynamic range test is realizable by one
MG3681A.
Expansion units
Communication system Applicable software Expansion unit
W-CDMA (3GPP) ——
CDMA2000
The expansion unit is installed in the MG3681A Digital Modulation Signal Generator mainframe.
• Configuration of Communication System Software and Expansion Unit
2
MU368060A AWGN Unit