Nikon S5100 - Manual (Page 145)

133
Setup Menu
Basi
c Came
ra Setup
Auto Off
If no operations are performed for a specified amount of time, the monitor turns
off and the camera enters standby mode (
A 17).
Choose the time allowed to elapse before the camera enters standby mode from
30 s, 1 min (default setting), 5 min, and 30 min.
d button M z (Setup menu) (A 121) M Auto off
C
When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp blinks.
• If no operations are performed for another three minutes, the camera will turn off automatically.
• When the power-on lamp is blinking, pressing any of the following buttons will turn the monitor
back on.
➝ Power switch, shutter-release button, A button, c button, or b (movie-record) button
C
Note on Auto Off
The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• When a menu is displayed: If auto off is set to
30 s or 1 min, it is extended to three minutes.
• During slide show playback: up to 30 minutes
• When the AC adapter EH-62D is connected: 30 minutes