Nikon AI-S Zoom-NIKKOR ED 200-400mm f-4 - Manual (Page 30)

30
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
■ Slip-in filter holder
Always use a (52mm screw-on) filter. A 52mm Screw-on NC Filter is
attached to the filter holder when shipped from the factory.
a Press down on the slip-in filter holder knob, and
turn counterclockwise until the white line on the
knob is at a right angle to the axis of the lens.
b Pull the slip-in filter holder from the lens body
c Detach the attached filter from the filter holder.
d Screw a filter onto the side of the filter holder
marked with the words “Nikon” and “JAPAN”.
• The slip-in filter holder can be attached with the
“Nikon” and “JAPAN” facing either the lens or
camera side without any effect on your pictures.
Slip-in Circular Polarizing Filter C-PL1L (optional)
• Blocks reflections from nonmetallic surfaces such as glass and water.
• When a Slip-in Circular Polarizing Filter C-PL1L is attached, the focus
distance is different from when a 52mm screw-on filter is attached.
The distance scale is shifted from the correct position. The closest
focused distance is extended slightly.
• The memory set position may change slightly when using focus
preset.
• Attach the C-PL1L filter before using the memory set function.
■ Recommended focusing screens
Various interchangeable focusing screens are available for certain
Nikon SLR cameras to suit any picture-taking situation. The ones
recommended for use with this lens are:
Screen
A B C E EC-B
EC-E F
G1
G2
G3
G4 J K L M P U
Camera
F6
◎
(–0.5)
◎ — ◎ — — — — ◎ —
◎
(–0.5)
— ◎
F5+DP-30 ◎ ◎ ○ ◎ ◎ —
○ ◎ — ◎ — ◎
F5+DA-30 ◎ ◎ ○ ◎ ◎ — ○ ◎ — ◎ — ◎
◎: Excellent focusing
○: Acceptable focusing
Slight vignetting or moiré patterns appear in the viewfinder, but not on
the film.
— : Not available