Nikon S9600 - Manual (Page 95)

73
Re
cordi
n
g and
Pl
ay
in
g Back
Movi
e
s
B
Notes About Vibration Reduction During Movie Recording
• When Movie VR (A75) in the movie menu is set to On (hybrid), the angle of
view (i.e., the area visible in the frame) becomes narrower during movie recording.
• When using a tripod to stabilize the camera during recording, set Movie VR to Off
to prevent potential errors caused by this function.
B
Camera Temperature
• The camera may become warm when shooting movies for an extended period of
time or when the camera is used in a hot area.
• If the inside of the camera becomes extremely hot when recording movies, the
camera will automatically stop recording.
The amount of time remaining until the camera stops recording (B10s) is
displayed.
After the camera stops recording, it turns itself off.
Leave the camera off until the inside of the camera has cooled.
B
Notes About Autofocus
Autofocus may not perform as expected ( A65). Should this occur, try the following:
1. Set AF area mode to Center and Autofocus mode to Single AF (default
setting) in the movie menu before starting movie recording.
2. Frame another subject—positioned at the same distance from the camera as the
intended subject—in the center of the frame, press the b (e movie-record)
button to start recording, and then modify the composition.