Error messages – Nikon S2500 User Manual
Page 163
151
T
e
ch
n
ical
No
te
s an
d I
n
de
x
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
Description
Solution
A
O (blinks)
Clock not set.
Set date and time.
N
Battery exhausted.
Battery exhausted.
Charge or replace the battery.
P
Battery temperature
high
Battery temperature is
high.
Turn off camera, and allow
battery to cool down before
resuming use. After
five seconds, the monitor will
turn off, and the power-on
lamp and flash lamp will blink
rapidly. After the lamps blink
for three minutes, the camera
will turn off automatically.
Pressing the power switch
also turns off the camera.
Q (
● blinks red)
Camera cannot focus.
• Refocus.
• Use focus lock.
P
Please wait for the
camera to finish
recording.
Camera cannot perform
other operations until
recording is complete.
Wait until message clears
from display automatically
when recording is complete.
–
P
Memory card is write
protected.
Write-protect switch is
in “lock” position.
Slide write-protect switch to
“write” position.
P
This card cannot be
used.
Error accessing memory
card.
• Use approved card.
• Check that connectors are
clean.
• Confirm that memory card
is correctly inserted.
P
This card cannot be
read.