Nikon L100 - Manual (Page 109)

97
Basic Camera Setup: The Setup Menu
Sh
oot
in
g, Playba
ck an
d
Se
tu
p Me
nu
s
3
Press K.
The new city time zone menu is displayed.
4
Press J or K to choose the travel destination
time zone (city name).
To use the camera in an area where daylight saving time
is in effect, press
H to display the W mark on the top of
the monitor and set the daylight saving time. When the
daylight saving time goes into effect, the time is
automatically advanced one hour. To release the daylight
saving time setting, press
I.
Press k to enter the travel destination.
While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
London, Casablanca
Exit
Time zone
1 5 / 0 5 / 2 0 0 9 1 5 : 3 0
Home time zone
Travel destination
Back
1 1 : 3 0 - 0 4 : 00
EDT:
New York
Toronto
Lima
B
The Clock Battery
The camera's clock is powered by a clock battery that is independent of the batteries that powers
the camera. The clock battery charges when the main batteries are installed or an AC adapter is
connected, and can provide several days of backup power after about ten hours of charging.
C
w (Home Time Zone)
• To switch to the home time zone, choose w Home in step 2 and press k.
• To change the home time zone, choose w Home in step 2 and perform steps 3 and 4, to set the
home time zone.
C
Daylight Saving Time
When the summer saving time begins or ends, turn the daylight saving time option on or off using
the home time zone display in Step 4.