Nikon S4300 - Manual (Page 179)

E 71
The Setup Menu
Refere
nce S
ect
io
n
g Vibration Reduction
Select the vibration reduction option for shooting.
Vibration reduction reduces blur, caused by slight hand movement known as
camera shake, which commonly occurs when shooting with telephoto zoom
applied or at slow shutter speeds. The effects of camera shake are reduced when
recording movies, in addition to when taking still pictures. Set Vibration
reduction to Off when using a tripod to stabilize the camera during shooting.
The current vibration reduction setting can be confirmed in the camera monitor
with shooting (
A6). When Off is selected, no icon is displayed.
B
Notes About Vibration Reduction
• Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode. Wait until the image of the monitor stabilizes before
shooting.
• Due to characteristics of the vibration reduction function, images displayed in the camera‘s
monitor immediately after shooting may be displayed blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
Tap the d tab M Tap z (Setup menu) M g Vibration reduction
Option Description
g On
(default setting) Lens-shift method vibration reduction reduces the effects of
camera shake.
k Off Vibration reduction is disabled.