Advanced Elements AE1020 - Manual (Page 10)

TM
10
3.6 Folding
NOTICE: Reverse your pump to completely deflate all chambers.
1. Completely deflate all air chambers and thoroughly dry the kayak.
2. Fold sides A and B inward.
3. Fold Bow and Stern section
inward (C and D).
4. Fold again at line (E).
5. Place into duffel bag.
4. GUIDELINES FOR USAGE
Paddlesports can be very dangerous and physically demanding. The user of this product should
understand that participation in paddlesports may involve serious injury or death. Observe the
following safety standards whenever using this product. The user of this product acknowledges
both an understanding and an assumption of the risk involved in paddlesports.
After you have inflated your kayak and before you put it in the water, inspect your equipment
for obvious signs of wear or failure. Review local rules and regulations and read again the
“CAUTION” statement.
Most areas have local laws and regulations about the use and equipment of small boats. Usually
a phone call to the local authorities will provide you with the needed information. Some areas
may require that you register and display a registration number on the front of your kayak.
Once you have been issued a number, it is best to affix it to the kayak by printing it on the
material with a permanent ink marker. If you are required to display a sticker or vinyl letters, an
inflatable boat ID kit can be purchased at most marine stores.