Viewing pictures on tv – Nikon 5400 User Manual
Page 94
82
Mor
e on Playback
Viewing Pictures on TV
The EG-E5000 audio/video cable included with the camera can be used to
connect the camera to a television or video-cassette recorder (VCR).
Choosing a Video Mode
The Video mode item in the setup menu offers a choice of NTSC and PAL (
144). Be sure that the mode selected matches the standard used in the video
device. In PAL video mode, video output will be suspended and the camera
monitor will turn on when you shoot movies or take pictures at Ultra HS.
1
Turn the camera off
3
Tune the television to the video channel
If in doubt, consult the documentation for
your television or VCR.
4
Select
mode
5
Turn the camera on
The camera monitor will remain off and the
television will display the image normally
shown in the monitor. If the camera is con-
nected to a VCR, images can be recorded to
video tape.
2
Connect the audio/video cable
Insert the black plug into the camera’s in-
terface connector, the yellow plug into the
video-in jack on the television or VCR. Con-
nect the white plug to the audio-in jack.