Automatic rearming, Valet mode – Aastra Telecom 600 User Manual

Page 11

Advertising
background image

Astra 600 - Page 7

5. Press the valet switch the number of time equal to the desired code (from 1-15).
6. Turn off the ignition then arm the system.
7. Disarm the system using the new Override Code to permanently store the new code.

Note: If the code set procedure is not properly performed, turn off the ignition and begin again. The override

code will not be permanently stored until the code is used to disarm the system.

Automatic Rearming

The automatic Rearming feature is designed to protect the vehicle in the event the system is

accidentally disarmed. With the Automatic Rearming feature enabled, the alarm will

automatically rearm 30 seconds after disarming. If the optional Passive Door Locking feature is

enabled, the doors will also lock when the system rearms.

The Automatic Rearming feature will be temporarily bypassed until the next arming cycle if the

ignition is turned on or the trunk/hood zone is opened.

Valet Mode

The Valet Mode temporarily disables the security system so the vehicle may be operated by a

mechanic or parking attendant.

To activate or deactivate the Valet Mode:

1. Turn on the ignition.
2. Press and hold the override switch for 5 seconds.

· The siren will chirp once to confirm the Valet Mode is on.

· The siren will chirp twice to confirm the Valet Mode is off.

3. Turn off the ignition.

While in Valet Mode the remote transmitters will continue to lock and unlock the doors, and

operate the optional auxiliary functions.

Advertising