Nikon D5300 - Manual (Page 224)

204 B The Setup Menu: Camera Setup
This option is displayed only when an Eye-Fi memory card (available separately from
third-party suppliers) is inserted in the camera. Choose Enable to upload
photographs to a preselected destination. Note that pictures will not be uploaded if
signal strength is insufficient.
Observe all local laws concerning wireless devices and choose Disable where
wireless devices are prohibited.
When an Eye-Fi card is inserted, its status is indicated by an icon
in the information display:
•
d: Eye-Fi upload disabled.
• e: Eye-Fi upload enabled but no pictures available for
upload.
• f (static): Eye-Fi upload enabled; waiting to begin upload.
• f (animated): Eye-Fi upload enabled; uploading data.
• g: Error.
View the standards with which the camera complies.
View the current camera firmware version.
Eye-Fi Upload
G button
➜ B setup menu
D
Eye-Fi Cards
Whether due to errors or other causes, Eye-Fi cards may emit wireless signals when Disable
is selected. If a warning is displayed in the monitor (
0 256), turn the camera off and remove
the card.
The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi
functions. Be sure to keep the card firmware updated. See the documentation provided with
the Eye-Fi card for more information; for information on the availability of Eye-Fi cards in
your country or region, contact the manufacturer.
A
Using Eye-Fi Cards in Ad Hoc Mode
Additional time may be required when connecting using Eye-Fi cards that support ad hoc
mode. Select longer values for Auto off timers > Standby timer in the setup menu (
0 186).
Conformity Marking G button
➜ B setup menu
Firmware Version G button
➜ B setup menu