Nikon D2Xs - Manual (Page 246)

232
Menu Guide—The Setup Menu
Save/Load Settings
Select Save settings to save all camera settings
except the date and time (
17) and monitor
brightness ( 215) to the camera memory card.
Saved settings can be restored by selecting Load
settings. To turn save or load settings, highlight
Save/load settings in the setup menu (
213)
and press the multi selector to the right. Press the multi selector up or down
to highlight an option and press the multi selector right to select. Note that
this option is unavailable when no memory card is inserted in the camera.
The Load settings option will be unavailable if the current memory card
does not contain saved settings.
Firmware Version
To display the current camera fi rmware version,
highlight Firmware version in the setup menu
(
213) and press the multi selector to the right.
Press the multi selector to the left to return to the
setup menu.
Saved Settings
Settings are saved to a fi le named “NCSETUP0” on the camera memory card. Deleting
or modifying this fi le will prevent the camera from loading the saved settings.