Shooting (p, s, a, and m modes), Shooting ( t , u , v , and w modes) – Nikon V3 User Manual
Page 265
241
n
Shooting (
t, u, v, and w Modes)
No photo taken when ML-L3 remote control shutter-release button is pressed
:
• Replace battery in remote control (
• Choose a remote control mode (
• The remote control standby timer has expired (
0 213).
• The remote is not pointed at the camera or the infrared receiver is not
visible (
• The remote is too far from the camera (
• Bright light is interfering with remote.
Smudges appear in photographs
: Clean the front and rear lens elements or the
dust shield (
Flicker or banding appears in movies or in the display
: Choose a Flicker reduc-
tion setting that matches the local AC power supply (
No flash
: The built-in flash and optional flash units will not fire during
movie recording (
0 59) or live image control (0 47), in best moment
capture (
0 76), Motion Snapshot (0 87), advanced movie (0 62),
creative palette (
0 52), or easy panorama (0 54) modes, or when HDR is
on (
0 53), a frame rate of 10 fps or higher is selected in continuous mode
0 92), or 6400 (NR) or 12800 (NR) is selected for ISO sensitivity
0 201).
Menu items are unavailable
: Some options are only available in particular
shooting or exposure modes (
The shutter release is disabled
: You selected mode
u after choosing a shutter
speed of “Bulb” or “Time” in mode
w (0 73). Choose a different shutter
speed.
Some shutter speeds are not available
: You are using the flash.
Colors are unnatural
:
• Adjust white balance to match the light source (
• Adjust Picture Control settings (
Cannot measure white balance
: The subject is too dark or too bright (
Picture Controls produce varying results
: A (auto) is selected for sharpening,
contrast, or saturation. For consistent results over a series of photos,
choose another setting (
Metering can not be changed
: Exposure lock is in effect (
0 214).
Noise (reddish areas and other artifacts) appears in long time-exposures
: Enable
long exposure noise reduction (
0 180).