Connecting to a television or vcr – Nikon 2000 User Manual
Page 48
38
Connections—Connecting to a T
elevision or VCR
Connecting to a Television or VCR
Television Playback
Using the video cable provided with your camera, you can connect the COOLPIX
2000 to a television or VCR.
1
Turn the camera off
Turn the camera off before connecting or disconnecting the video cable.
2
Connect the video cable to the camera
Insert the pin jack into the camera’s video out
connector.
3
Connect the video cable to the video device
Connect the other end of the cable to the video-
in jack on the television or VCR.
Use an AC Adapter
To prevent the display in the television from turning off whenever the camera
enters sleep mode, connect the camera to an EH-53 AC adapter (available
separately).
Choosing a Video Mode (
76)
The Video Mode item offers a choice of NTSC and PAL standards for video
output. Be sure that the standard selected matches that of any video device
to which you connect the camera.
4
Tune the television to the video channel
5
Turn the camera on
The television will show the image normally displayed in the monitor. The
camera monitor will be blank.
VIDEO