Nikon S2 - Manual (Page 208)

188
n
Shooting (P, S, A, and M Modes)
Movies
Flicker or banding appears in movies or in the display : Choose a Flicker reduc-
tion setting that matches the local AC power supply ( 0 167).
No flash : See page 79. The flash will not fire when off ( 0 75, 77); in P, S, A,
and M modes, the flash will not fire when lowered.
Menu items are unavailable
: Some options are only available in particular
shooting or exposure modes ( 0 181) or when wireless mobile adapter is
attached ( 0 80).
The shutter release is disabled : You selected mode S after choosing a shutter
speed of “Bulb” in mode M ( 0 36). Choose a different shutter speed.
Some shutter speeds are not available : You are using the flash.
Colors are unnatural :
• Adjust white balance to match the light source ( 0 149).
• Adjust Picture Control settings ( 0 155).
Cannot measure white balance : The subject is too dark or too bright ( 0 152).
Picture Controls produce varying results : A (auto) is selected for sharpening,
contrast, or saturation. For consistent results over a series of photos,
choose another setting (
0 157).
Noise (reddish areas and other artifacts) appears in long time-exposures : Enable
long exposure noise reduction ( 0 133).
Cannot record movies : The movie-record button can not be used to record
movies in best moment capture or Motion Snapshot mode ( 0 57, 67).
No sound is recorded for movies :
• Microphone off is selected for Movie sound options > Microphone
( 0 147).
• Live audio is not recorded with slow-motion, fast-motion, or jump-cut
movies ( 0 48) or with Motion Snapshots recorded with None selected
for Audio ( 0 67).