Akai UNIQUEST 4000S User Manual

Page 19

Advertising
background image

A Quick Tour of UniQuest For EWI 4000s

UniQuest for EWI 4000s

19

of

44

BREATH THRESH

Range is 0 to 100%. This is the threshold level above which the Oscillator will
begin sounding.

BREATH CURVE

Range is -50% to +50%. This parameter sets the mapping of breath pressure to
output volume for this oscillator. 0% means a linear 1:1 mapping as follows:

Oscillator Master Volume Parameters

LEVEL

Range is 0% to 100%. This parameter sets the master volume of the Oscillator it
belongs to.

Oscillator X-FADE Parameter

X-FADE

Range is OFF or ON. This parameter is only effective when the BREATH
THRESHOLD parameter of OSC2 is set to a non-zero value. When enabled, this
parameter causes OSC 1 to be decreased in volume for breath pressure levels
above the OSC 2 BREATH THRESHOLD:

In the example shown here, both oscillators are set to use linear breath curves, with
OSC 1 and OSC 2 set to breath thresholds of 0% and 20% respectively.

Advertising