Avocent C Series - Manual (Page 25)

Chapter 2: Installation 15
Figure 2.10: Desktop Appliance - Rear View
3. Locate the power cord that was supplied with your Desktop Appliance and plug one end into
the appliance. Plug the other end of the power cord into an appropriate AC wall outlet. This
outlet must be near the equipment and easily accessible to allow for unplugging prior to any
servicing of the unit.
NOTE: The power cord serves as the main disconnect.
4. Power up the Desktop Appliance and computer.
NOTE: The computer will power up automatically if the RPC option is installed.
Speakers
Microphone
Stereo
Desktop Appliance
Slot 0 Slot 1