AT&T 9230 - Manual (Page 5)

INSTALLATION
4
Before You Install
b) Plug battery pack
connector into
handset. Use only
AT&T battery 3301
(SKU#91076).
d) Replace
cover by
sliding it up
into place.
a) Remove battery
compartment
cover by pressing
on the
indentation
and sliding
downward.
c) Place battery pack
and wires in
compartment.
1 Choose a location for the base near an electrical outlet and a
telephone jack.
This phone requires a modular telephone jack and a standard electrical
outlet (110v AC) not controlled by a wall switch.
2 Install the handset battery.