Aprilaire 8570 - Manual (Page 11)

18 19
8. Info Screen
The Info Screen can be accessed through the Main Screen by pressing
INFO button. When pushed, the screen will show the outdoor
temperature and indoor relative humidity (when connected to an
Aprilaire
® Automatic Digital Humidifier Control). Then the thermostat
will display the contact information for your HVAC dealer should you
have any problems or need any supplies.
7.7 Set Thermostat Name
You can give your thermostat a name if you would like. Within this menu, the thermostat
gives you some standard choices. Selecting CUSTOM NAME allows you to customize the
name for your thermostat. This feature is most useful when installed with a Model 6504
Zoned Comfort Control Panel to more easily identify the thermostats on your system.
SET THERMOSTAT NAME
GREAT ROOM
LIVING ROOM
MASTER BEDROOM
BEDROOM
KITCHEN
MORE
BACK SELECT
GREAT ROOM
7.8 Adjust Contrast
The Contrast Adjustment Option allows the user to select a contrast level from 0 (lightest)
to 80 (darkest) in increments of 2. Use the Up/Down arrows to adjust the display contrast
to an appropriate level; and press SAVE.
ADJUST CONTRAST
BACK SAVE
60
APRILAIRE MODEL 8570
OUTDOOR INDOOR
TEMPERATURE HUMIDITY
BACK
68° 45%
APRILAIRE MODEL 8570
XYZ HEATING & COOLING
[555] 555 - 1234
XYZHEATING.COM
MESSAGES:
BACK RESET
9. Viewing Other Thermostats on the
System (Model 6504 Installation Only)
If installed with an Aprilaire ® Model 6504,
you have another option in the MAIN MENU.
This option is to VIEW OTHER THERMOSTATS.
When this is selected a list of other
thermostats on the system will be displayed. If you have programmed a name in the THERMOSTAT(S), their
respective name(s) will be displayed. If no names are given, you will see default names such as THERMOSTAT 2.
When viewing other thermostats, you have the option of temporarily changing the temperature setting or
resuming the program. The left multi-function button will be labeled RESUME PROG. if the temperature program is
not running. This button would be used to resume the program, for the thermostat being viewed, if it is in hold.
Either RESUME PROG. or EXIT returns you to the VIEW THERMOSTAT LIST menu.
10. In Case of Power Failure
This thermostat does not require a battery. If the power goes out, the screen is blank. During the period the power is off,
the heating/cooling system will not operate. When power is restored, the thermostat will return to the previous settings.
If the power is off for more than 2 hours, you will need to reset the clock on the thermostat but all other information will
be stored. You will not have to reprogram your thermostat or change any settings that you have previously set.
11. Cleaning
If the surface of the thermostat becomes dirty it can be cleaned with plain water or many non-abrasive household cleaners,
including glass cleaner. When using any cleaner be careful not to get any into the interior of the thermostat. Do not spray
any liquid directly onto the thermostat. Spray the cleaner onto a soft cloth and wipe the surface of the thermostat.
VIEW THERMOSTAT LIST
THERMOSTAT 1
THERMOSTAT 2
THERMOSTAT 3
THERMOSTAT 4
BACK SELECT
THERMOSTAT 1
THERMOSTAT 1
AUTO MODE
FAN AUTO
SETPOINT
HEAT 70°
RESUME COOL 78°
PROG. EXIT
72°
THERMOSTAT 1 MAIN MENU
MORE
HOLD
PROGRAM
PROGRAMMED FAN
SETTINGS
SET DATE AND TIME
VIEW THERMOSTAT LIST
EXIT SELECT
VIEW THERMOSTAT LIST