ROTHENBERGER RODIA CLEANER 1400 User Manual
Page 12
10
ENGLISH
15 Pull the plug from the socket. When not using the electric tool, before maintenance or
when changing tools, such as saw blades, drills and cutting bits.
16 Do not leave any tool keys inserted. Before switching on, check to see that keys and ad-
justment tools have been removed.
17 Avoid unintentional activation. When plugging the tool in, make sure that the switch is
turned off.
18 Use outdoor extension cords. When outdoors, use only extension cords that are approved
and appropriately marked.
19 Be alert. Pay attention to what you do. Approach your work sensibly. Do not use the electric
tool when you are distracted.
20 Check the electric tool for damage. Before using the electric tool, you must inspect safety
equipment or slightly damaged parts carefully to ensure that they work properly and as in-
tended. Check to see that the moving parts operate freely and don't stick, and to make sure
no parts are damaged. All parts must be mounted properly and meet all the conditions for
ensuring trouble-free operation of the electric tool.
Damaged safety equipment and parts must be properly repaired or replaced by a profes-
sional facility, unless otherwise indicated in the user manual. Damaged switches must be
replaced by a customer service facility.
Never use an electric tool whose switch cannot be turned on and off.
21 Caution. Using other insertion tools and accessories may cause injury.
22 Have your tool repaired by an electrical expert. This electric tool meets applicable safety
requirements. Repairs must be made only by an electrical expert using original replacement
parts. Otherwise accidents many occur.
1.3
Special Safety Instructions
•
Components used in packaging (if plastic bags) can be dangerous keep away from children
and animals.
•
Before emptying the tank, switch off the machine and disconnect the plug from the power
outlet.
•
The suction nozzle should be kept away from the body, especially delicate areas such as
the eyes, ears and mouth.
•
The equipment should be correctly assembled before use.
•
These machines are not designed for picking up health endangering dusts or inflamma-
ble/explosives substances (like ash and soot).
•
The machine should never be immersed in water or pressure jet of water used for cleaning.
•
When using the machine in wet rooms (e.g. in the bathroom) only connect it to sockets
which are connected in series with a ground fault circuit interrupter. In case of doubt, consult
an electrician.
•
Before vacuuming liquids, check the float functions correctly.
•
If the equipment should overturn it is recommended that the machine should be stood up be-
fore switching off.
•
If foam/liquid should come from the machine exhaust switch off immediately.
•
The equipment should not be used to pick up water from containers lavatories, tubs, etc.
•
Aggressive solvents or detergents should not be used.
2
Technical Data
Class of protection ...................... I
Protection type ............................ IP X4
Typical A-rated sound level:
Noise pressure level (L
pA
) ........... 75 dB (A) ¦ K
pA
3 dB (A)
Sound power level (L
WA
) ............. 86 dB (A) ¦ K
WA
3 dB (A)