ROTHENBERGER MULTI MOBILE Set - Manual (Page 11)

ENGLISH 7
5 Operating the Appliance
Point the burner away from body and flammable objects.
Turn the regulating knob (2) counterclockwise to open the valve, press the piezo trigger (4) to
ignite the burner.
Adjust flame size by turning the regulating knob (2). When the regulating knob is being closed
the flame is automatically extinguished
– safe and convenient.
After use, ensure that the valve is fully shut (regulating knob turned fully clockwise) and unscrew
the gas cartridge from the Multi Mobile.
6 Changing the Gas Cartridge
Shut the valve with the regulating knob (2). Be sure the flame is extinguished, the copper bit has
cooled down and no other flame is nearby. Take the appliance outdoors away from other peo-
ple. Unscrew the gas cartridge/cylinder from the valve and replace the appliance sealings if they
are cracked or worn. Avoid cross threading by putting the valve onto the gas cartridge/cylinder
screw thread squarely and screw on hand tight only, as described in section 4.
7 Routine Service and Maintenance
Always ensure that the sealings (1) are in place and in good condition. Inspect them every time
you assemble the appliance. If the sealings are damaged or worn, replace them.
New sealings and packings are available at your local dealer.
8 Service and Repair
Never attempt any other maintenance or repair than here prescribed.
Never modify the appliance. This may cause the appliance to become unsafe.
Cleaning / Changing Nozzle
1. Undo the screw from the burner (D).
2. Remove copper bit and copper bit head from burner. Remove the burner from the nozzle
holder (E).
3. Remove jet nippel from jet nippel support (F) clean the nozzle. (When you assemble the
burner please do the above in reverse order.)
9 Spare and Accessories
Use only ROTHENBERGER brand spares and accessories. Be careful when fitting spares and
accessories. Avoid touching hot parts.
Only use ROTHENBERGER gas cartridges or cylinders to this appliance.