ROTHENBERGER RP Pro II - Manual (Page 11)

10
This document contains important instructions for
people safety. It has been drawn up for the user.
Carefully keep it for any further reference.
Please carefully read and follow these instructions for
every starting of the testing power pump:
1) Be sure that the electric system is equipped with a
ground fault interrupter switch.
2) Disconnect always the power pump at the end of
every use and before the following operations:
- Moving the power pump from a position to
another,
- Making any maintenance operations,
- Making every check of accessories replacement.
3) Do not pull the electric cable, the water feeding
hose, the high pressure hose connected to the
piping system, in order to get any moving of the
electric pump.
4) Never pull the power supply cable or the power
pump in order to disconnect the plug from the
socket.
Safety instrutions 5) Never allow incapable (children, teen-agers, etc.) or
not trained people to use the power pump.
6) In order to guarantee the power pump safety,
follow the manufacturer instructions and use
original spare parts, components and accessories
only or parts approved by the manufacturer.
7) The water jets can be very dangerous if used in
an improper way: never point the jet to people,
animals, equipment under pressure and to the
power pump itself.
8) Do not point the water jet to yourself or to other
people in order to clean clothes or shoes.
9) ATTENTION: hoses, accessories and couplings are
really important for the power pump safety. Please
use hoses, accessories and couplings recommended
by the manufacturer only.
10) Do not use the power pump if the power supply
cable or any other important parts (such as safety
devices, high pressure hose, etc.) are damaged.
11) If an extension cable has to be used, the plug and
the socket must be water-proof.
12) Improper cable extensions can be dangerous.
OPERATING INSTRUCTIONS
ENGLISH