ALK Technologies CoPilot Live Smartphone - Manual (Page 7)

Region Selection
If you purchased an additional data region, when downloading map data to
your Smartphone you will need to make sure the proper region is active. To
do this, on your desktop in Planning mode click the Map menu > Region >
and check the desired region.
Changing the Voice Option at Any Time
CoPilot offers one or both of the following voice options, depending on your
selected language:
Male Pre-Recorded Sound Files
Female Pre-Recorded Sound Files
To change the voice option:
1. Connect your Smartphone to your PC via Activesync.
2. Insert the Install Disc into your CD-ROM drive.
3. Select Modify from the InstallShield menu and click Next.
4. Enter your Product Key (found on the front of your CoPilot Quick Start
Guide or on the supplied Product Key card) and click Next.
5. Make sure that ONLY Smartphone Installation is checked and click
Next.
6. Select your voice option and click Next.
7. Click Yes to reinstall Pocket Speech.
8. Click No to reinstall CoPilot.
9. Press Ok on your Smartphone to reinstall.
10. Press Yes to All if prompted.
11. Click Ok on your desktop, then click Finish to complete the process.
Adding a Data Region
If you have purchased an additional data region after your initial purchase
of CoPilot, you will need to modify the original (“Base”) installation and
activate the new region.
IMPORTANT: You can only use your Expansion Product Key AFTER you
have installed CoPilot with a Product Key for the Base product. If you have
not yet installed CoPilot, please do so first and then follow the instructions
below.
ON YOUR DESKTOP/LAPTOP:
1. Insert your CoPilot Install Disc into your CD-ROM drive.
2. Select Modify and click Next when the InstallShield Wizard appears.
3. Enter your Expansion Product Key when prompted to enter a Product
Key.
4. Follow the on-screen instructions for installing to your desktop and
Smartphone.
5. The Activation Wizard will appear at the end of installation. Activation
occurs just as it did when you originally installed CoPilot.
ON YOUR SMARTPHONE:
IMPORTANT: You must install CoPilot to your Smartphone using your
Base Product Key AND you must have data downloaded to your
Smartphone before using your Expansion Product Key.
1. Open CoPilot on your Smartphone.
2. Press the Menu softkey, then select Options > Upgrade License.
3. Enter your Expansion Product Key (found in your order confirmation e-
mail) when prompted to enter a Product Key.
4. Follow the on-screen instructions.
5. Activation occurs just as it did when you originally installed CoPilot.
If you have any questions about this process, please visit our Support
Center at www.alk.eu.com or send an e-mail to [email protected].
- 9 - - 10 -